PIPE CUTTING MACHINE:
Pipe cutting machine have a gauge fixed for requirement length up to 2000 mm long with 2mm tolerance and able to cut from 60 mm to 193 mm dia along with supporting texture. After the cutting of the pipe in the desired length, it will go to the 2nd level i.e. Boring Machine.
PIPE BORING MACHINE:
The pipes are set into the fully automatic Boring machine with CNC controller vide through hydraulic power pack. Boring of the pipes are done at a time at both ends facing centering and depth as per requirement length with a tolerance level of 0-0,60 to 193 mm dia up to 2500 mm length. After pipes were bored, it will move to the wielding machine.
WELDING MACHINE:
The bored pipes are loaded on the fully automatic wielding machine from track to loading and unloading systems which can wield at both end at a time with filet thickness to be adjustable fully auto by CNC and sensor systems. The housing is manual fixed at the both end through pressure by air systems.
ASSEMBLE MACHINE:
For rollers fittings twin type 2 motors 2 power pack with 2 nos pressure gauge which maintain the pressure gauge pressure of brg, Nylone components dust cover as per pressure meter, which indicate the require of different pressure which require.
We have also a friction test machine for 2000 mm long.
FRICTION & FACTOR TESTING MACHINE WITH TIR:
We have also Friction Test Machine up to 2000mm long idler.
WATER & DUST TEST MACHINE:
Water and dust machine is combined at a time water and dust can be checked.
a) Water Test:
Water shower is directed at an angle 45 deg towards bearing housing and tube for required time at both ends of rotating idler at 250 rpm min.
b) Dust Testing:
Roller, directed rotating in dust (Coal Fine Dust) chamber with 350rpm – 30 minutes above
